您好,欢迎光临本网站![请登录][注册会员]  
文件名称: squashfs2.2-r2.tar.gz
  所属分类: Linux
  开发工具:
  文件大小: 229kb
  下载次数: 0
  上传时间: 2016-04-21
  提 供 者: uge***
 详细说明: SQUASHFS 2.2 - A squashed read-only filesystem for Linux Copyright 2005 Phillip Lougher (phillip@lougher.demon.co.uk) Released under the GPL licence (version 2 or later). Welcome to Squashfs version 2.2-r2. Please see the CHANGES file for details of change s. Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib compression to compress both files, inodes and directories. Inodes in the system are very small and all blocks are packed to minimise data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. Squashfs is intended for general read-only filesystem use, for archival use (i.e. in cases where a .tar.gz file may be used), and in constrained block device/memory systems (e.g. embedded systems) where low overhead is needed. 1. SQUASHFS OVERVIEW -------------------- 1. Data, inodes and directories are compressed. 2. Squashfs stores full uid/gids (32 bits), and file creation time. 3. Files up to 2^32 bytes are supported. Filesystems can be up to 2^32 bytes. 4. Inode and directory data are highly compacted, and packed on byte boundaries. Each compressed inode is on average 8 bytes in length (the exact length varies on file type, i.e. regular file, directory, symbolic link, and block/char device inodes have different sizes). 5. Squashfs can use block sizes up to 64K (the default size is 64K). Using 64K blocks achieves greater compression ratios than the normal 4K block size. 6. File duplicates are detected and removed. 7. Both big and little endian architectures are supported. Squashfs can mount filesystems created on different byte order machines. 2. USING SQUASHFS ----------------- Squashfs filesystems should be mounted with 'mount' with the filesystem type 'squashfs'. If the filesystem is on a block device, the filesystem can be mounted directly, e.g. %mount -t squashfs /dev/sda1 /mnt Will mount the squashfs filesystem on "/dev/sda1" under the directory "/mnt". If the squashfs filesystem has been written to a file, the loopback device can be used to mount it (loopback support must be in the kernel), e.g. %mount -t squashfs image /mnt -o loop Will mount the squashfs filesystem in the file "image" under the directory "/mnt". 3. MKSQUASHFS ------------- 3.1 Mksquashfs options and overview. ------------------------------------ As squashfs is a read-only filesystem, the mksquashfs program must be used to create populated squashfs filesystems. SYNTAX:mksquashfs source1 source2 ... dest [options] [-e list of exclude dirs/files] Options are -version print version, licence and copyright message -info print files written to filesystem -b set data block to . Default 65536 bytes -2.0 create a 2.0 filesystem -noI do not compress inode table -noD do not compress data blocks -noF do not compress fragment blocks -no-fragments do not use fragments -always-use-fragments use fragment blocks for files larger than block size -no-duplicates do not perform duplicate checking -noappend do not append to existing filesystem -keep-as-directory if one source directory is specified, create a root directory containing that directory, rather than the contents of the directory -root-becomes when appending source files/directories, make the original root become a subdirectory in the new root called , rather than adding the new source items to the original root -all-root make all files owned by root -force-uid uid set all file uids to uid -force-gid gid set all file gids to gid -le create a little endian filesystem -be create a big endian filesystem -nopad do not pad filesystem to a multiple of 4K -check_data add checkdata for greater filesystem checks -root-owned alternative name for -all-root -noInodeCompression alternative name for -noI -noDataCompression alternative name for -noD -noFragmentCompression alternative name for -noF -sort sort files according to priorities in . One file or dir with priority per line. Priority -32768 to 32767, default priority 0 -ef list of exclude dirs/files. One per line Source1 source2 ... are the source directories/files containing the files/directories that will form the squashfs filesystem. If a single directory is specified (i.e. mksquashfs source output_fs) the squashfs filesystem will consist of that directory, with the top-level root directory corresponding to the source directory. If multiple source directories or files are specified, mksquashfs will merge the specified sources into a single filesystem, with the root directory containing each of the source files/directories. The name of each directory entry will be the basename of the source path. If more than one source entry maps to the same name, the conflicts are named xxx_1, xxx_2, etc. where xxx is the original name. To make this clear, take two example directories. Source directory "/home/phillip/test" contains "file1", "file2" and "dir1". Source directory "goodies" contains "goodies1", "goodies2" and "goodies3". usage example 1: %mksquashfs /home/phillip/test output_fs This will generate a squashfs filesystem with root entries "file1", "file2" and "dir1". example 2: %mksquashfs /home/phillip/test goodies output_fs This will create a squashfs filesystem with the root containing entries "test" and "goodies" corresponding to the source directories "/home/phillip/test" and "goodies". example 3: %mksquashfs /home/phillip/test goodies test output_fs This is the same as the previous example, except a third source directory "test" has been specified. This conflicts with the first directory named "test" and will be renamed "test_1". Multiple sources allow filesystems to be generated without needing to copy all source files into a common directory. This simplifies creating filesystems. The -keep-as-directory option can be used when only one source directory is specified, and you wish the root to contain that directory, rather than the contents of the directory. For example: example 4: %mksquashfs /home/phillip/test output_fs -keep-as-directory This is the same as example 1, except for -keep-as-directory. This will generate a root directory containing directory "test", rather than the "test" directory contents "file1", "file2" and "dir1". The Dest argument is the destination where the squashfs filesystem will be written. This can either be a conventional file or a block device. If the file doesn't exist it will be created, if it does exist and a squashfs filesystem exists on it, mksquashfs will append. The -noappend option will write a new filesystem irrespective of whether an existing filesystem is present. 3.2 Changing compression defaults used in mksquashfs ---------------------------------------------------- There are a large number of options that can be used to control the compression in mksquashfs. By and large the defaults are the most optimum settings and should only be changed in exceptional circumstances! The -noI, -noD and -noF options (also -noInodeCompression, -noDataCompression and -noFragmentCompression) can be used to force mksquashfs to not compress inodes/directories, data and fragments respectively. Giving all options generates an uncompressed filesystem. The -no-fragments tells mksquashfs to not generate fragment blocks, and rather generate a filesystem similar to a Squashfs 1.x filesystem. It will of course still be a Squashfs 2.0 filesystem but without fragments, and so it won't be mountable on a Squashfs 1.x system. The -always-use-fragments option tells mksquashfs to always generate fragments for files irrespective of the file length. By default only small files less than the block size are packed into fragment blocks. The ends of files which do not fit fully into a block, are NOT by default packed into fragments. To illustrate this, a 100K file has an initial 64K block and a 36K remainder. This 36K remainder is not packed into a fragment by default. This is because to do so leads to a 10 - 20% drop in sequential I/O performance, as a disk head seek is needed to seek to the initial file data and another disk seek is need to seek to the fragment block. Specify this option if you want file remainders to be packed into fragment blocks. Doing so may increase the compression obtained BUT at the expense of I/O speed. The -no-duplicates option tells mksquashfs to not check the files being added to the filesystem for duplicates. This can result in quicker filesystem generation and appending although obviously compression will suffer badly if there is a lot of duplicate files. The -b option allows the block size to be selected, this can be either 4096, 8192, 16384, 32768 or 65536 bytes. 3.3 Specifying the UIDs/GIDs used in the filesystem --------------------------------------------------- By default files in the generated filesystem inherit the UID and GID ownership of the original file. However, mksquashfs provides a number of options which can be used to override the ownership. The options -all-root and -root-owned (both do exactly the same thing) force all file uids/gids in the generated Squashfs filesystem to be root. This allows root owned filesystems to be built without root access on the host machine. The "-force-uid uid" option forces all files in the generated Squashfs filesystem to be owned by the specified uid. The uid can be specified either by name (i.e. "root") or by number. The "-force-gid gid" option forces all files in the generated Squashfs filesystem to be group owned by the specified gid. The gid can be specified either by name (i.e. "root") or by number. 3.4 Excluding files from the filesystem --------------------------------------- The -e and -ef options allow files/directories to be specified which are excluded from the output filesystem. The -e option takes the exclude files/directories from the command line, the -ef option takes the exlude files/directories from the specified exclude file, one file/directory per line. If an exclude file/directory is absolute (i.e. prefixed with /, ../, or ./) the entry is treated as absolute, however, if an exclude file/directory is relative, it is treated as being relative to each of the sources in turn, i.e. %mksquashfs /tmp/source1 source2 output_fs -e ex1 /tmp/source1/ex2 out/ex3 Will generate exclude files /tmp/source1/ex2, /tmp/source1/ex1, source2/ex1, /tmp/source1/out/ex3 and source2/out/ex3. The -e and -ef exclude options are usefully used in archiving the entire filesystem, where it is wished to avoid archiving /proc, and the filesystem being generated, i.e. %mksquashfs / /tmp/root.sqsh -e proc /tmp/root.sqsh Multiple -ef options can be specified on the command line, and the -ef option can be used in conjuction with the -e option. 3.5 Appending to squashfs filesystems ------------------------------------- Running squashfs with the destination directory containing an existing filesystem will add the source items to the existing filesystem. By default, the source items are added to the existing root directory. To make this clear... An existing filesystem "image" contains root entries "old1", and "old2". Source directory "/home/phillip/test" contains "file1", "file2" and "dir1". example 1: %mksquashfs /home/phillip/test image Will create a new "image" with root entries "old1", "old2", "file1", "file2" and "dir1" example 2: %mksquashfs /home/phillip/test image -keep-as-directory Will create a new "image" with root entries "old1", "old2", and "test". As shown in the previous section, for single source directories '-keep-as-directory' adds the source directory rather than the contents of the directory. example 3: %mksquashfs /home/phillip/test image -keep-as-directory -root-becomes original-root Will create a new "image" with root entries "original-root", and "test". The '-root-becomes' option specifies that the original root becomes a subdirectory in the new root, with the specified name. The append option with file duplicate detection, means squashfs can be used as a simple versioning archiving filesystem. A squashfs filesystem can be created with for example the linux-2.4.19 source. Appending the linux-2.4.20 source will create a filesystem with the two source trees, but only the changed files will take extra room, the unchanged files will be detected as duplicates. 3.6 Miscellaneous options ------------------------- The -info option displays the files/directories as they are compressed and added to the filesystem. The original uncompressed size of each file is printed, along with DUPLICATE if the file is a duplicate of a file in the filesystem. The -le and -be options can be used to force mksquashfs to generate a little endian or big endian filesystem. Normally mksquashfs will generate a filesystem in the host byte order. Squashfs, for portability, will mount different ordered filesystems (i.e. it can mount big endian filesystems running on a little endian machine), but these options can be used for greater optimisation. The -nopad option informs mksquashfs to not pad the filesystem to a 4K multiple. This is performed by default to enable the output filesystem file to be mounted by loopback, which requires files to be a 4K multiple. If the filesystem is being written to a block device, or is to be stored in a bootimage, the extra pad bytes are not needed. 4. FILESYSTEM LAYOUT -------------------- Brief filesystem design notes follow for the original 1.x filesystem layout. A description of the 2.0 filesystem layout will be written sometime! A squashfs filesystem consists of five parts, packed together on a byte alignment: --------------- | superblock | |---------------| | data | | blocks | |---------------| | inodes | |---------------| | directories | |---------------| | uid/gid | | lookup table | --------------- Compressed data blocks are written to the filesystem as files are read from the source directory, and checked for duplicates. Once all file data has been written the completed inode, directory and uid/gid lookup tables are written. 4.1 Metadata ------------ Metadata (inodes and directories) are compressed in 8Kbyte blocks. Each compressed block is prefixed by a two byte length, the top bit is set if the block is uncompressed. A block will be uncompressed if the -noI option is set, or if the compressed block was larger than the uncompressed block. Inodes are packed into the metadata blocks, and are not aligned to block boundaries, therefore inodes overlap compressed blocks. An inode is identified by a two field tuple . Inode contents vary depending on the file type. The base inode consists of: base inode: Inode type Mode uid index gid index The inode type is 4 bits in size, and the mode is 12 bits. The uid and gid indexes are 4 bits in length. Ordinarily, this will allow 16 unique indexes into the uid table. To minimise overhead, the uid index is used in conjunction with the spare bit in the file type to form a 48 entry index as follows: inode type 1 - 5: uid index = uid inode type 5 -10: uid index = 16 + uid inode type 11 - 15: uid index = 32 + uid In this way 48 unique uids are supported using 4 bits, minimising data inode overhead. The 4 bit gid index is used to index into a 15 entry gid table. Gid index 15 is used to indicate that the gid is the same as the uid. This prevents the 15 entry gid table filling up with the common case where the uid/gid is the same. The data contents of symbolic links are stored immediately after the symbolic link inode, inside the inode table. This allows the normally small symbolic link to be compressed as part of the inode table, achieving much greater compression than if the symbolic link was compressed individually. Similarly, the block index for regular files is stored immediately after the regular file inode. The block index is a list of block lengths (two bytes each), rather than block addresses, saving two bytes per block. The block address for a given block is computed by the summation of the previous block lengths. This takes advantage of the fact that the blocks making up a file are stored contiguously in the filesystem. The top bit of each block length is set if the block is uncompressed, either because the -noD option is set, or if the compressed block was larger than the uncompressed block. 4.2 Directories --------------- Like inodes, directories are packed into the metadata blocks, and are not aligned on block boundaries, therefore directories can overlap compressed blocks. A directory is, again, identified by a two field tuple . Directories are organised in a slightly complex way, and are not simply a list of file names and inode tuples. The organisation takes advantage of the observation that in most cases, the inodes of the files in the directory will be in the same compressed metadata block, and therefore, the inode tuples will have the same start block. Directories are therefore organised in a two level list, a directory header containing the shared start block value, and a sequence of directory entries, each of which share the shared start block. A new directory header is written once/if the inode start block changes. The directory header/directory entry list is repeated as many times as necessary. The organisation is as follows: directory_header: count (8 bits) inode start block (24 bits) directory entry: * count inode offset (13 bits) inode type (3 bits) filename size (8 bits) filename This organisation saves on average 3 bytes per filename. 4.3 File data ------------- File data is compressed on a block by block basis and written to the filesystem. The filesystem supports up to 32K blocks, which achieves greater compression ratios than the Linux 4K page size. The disadvantage with using greater than 4K blocks (and the reason why most filesystems do not), is that the VFS reads data in 4K pages. The filesystem reads and decompresses a larger block containing that page (e.g. 32K). However, only 4K can be returned to the VFS, resulting in a very inefficient filesystem, as 28K must be thrown away. Squashfs, solves this problem by explicitly pushing the extra pages into the page cache. 5. AUTHOR INFO -------------- Squashfs was written by Phillip Lougher, email phillip@lougher.demon.co.uk, in Chepstow, Wales, UK. If you like the program, or have any problems, then please email me, as it's nice to get feedback! ...展开收缩
(系统自动生成,下载前可以参看下载内容)

下载文件列表

相关说明

  • 本站资源为会员上传分享交流与学习,如有侵犯您的权益,请联系我们删除.
  • 本站是交换下载平台,提供交流渠道,下载内容来自于网络,除下载问题外,其它问题请自行百度
  • 本站已设置防盗链,请勿用迅雷、QQ旋风等多线程下载软件下载资源,下载后用WinRAR最新版进行解压.
  • 如果您发现内容无法下载,请稍后再次尝试;或者到消费记录里找到下载记录反馈给我们.
  • 下载后发现下载的内容跟说明不相乎,请到消费记录里找到下载记录反馈给我们,经确认后退回积分.
  • 如下载前有疑问,可以通过点击"提供者"的名字,查看对方的联系方式,联系对方咨询.
 相关搜索: squashfs2
 输入关键字,在本站1000多万海量源码库中尽情搜索: