开发工具:
文件大小: 8mb
下载次数: 0
上传时间: 2018-09-21
详细说明： #define _FDC2X14_C #include "sys.h" #include "FDC2X14.h" #include "myiic.h" #include "delay.h" #include "usart.h" #define FDC2X14_Address 0x2A #define FDC2X14_W FDC2X14_Address<<1 #define FDC2X14_R (FDC2X14_Address<<1)+1 #define DATA_CH0 0x00 #define DATA_LSB_CH0 0x01 #define DATA_CH1 0x02 #define DATA_LSB_CH1 0x03 #define DATA_CH2 0x04 #define DATA_LSB_CH2 0x05 #define DATA_CH3 0x06 #define DATA_LSB_CH3 0x07 #define RCOUNT_CH0 0x08 #define RCOUNT_CH1 0x09 #de fine RCOUNT_CH2 0x0A #define RCOUNT_CH3 0x0B #define OFFSET_CH0 0x0C #define OFFSET_CH1 0x0D #define OFFSET_CH2 0x0E #define OFFSET_CH3 0x0F #define SETTLECOUNT_CH0 0x10 #define SETTLECOUNT_CH1 0x11 #define SETTLECOUNT_CH2 0x12 #define SETTLECOUNT_CH3 0x13 #define CLOCK_DIVIDERS_C_CH0 0x14 #define CLOCK_DIVIDERS_C_CH1 0x15 #define CLOCK_DIVIDERS_C_CH2 0x16 #define CLOCK_DIVIDERS_C_CH3 0x17 #define STATUS 0x18 #define ERROR_CONFIG 0x19 #define CONFIG 0x1A #define MUX_CONFIG 0x1B #define RESET_DEV 0x1C #define DRIVE_CURRENT_CH0 0x1E #define DRIVE_CURRENT_CH1 0x1F #define DRIVE_CURRENT_CH2 0x20 #define DRIVE_CURRENT_CH3 0x21 #define MANUFACTURER_ID 0x7E #define DEVICE_ID 0x7F u32 Init_FDC[4]; u32 Data_FDC[4]; ///FDC2X14 IO��ʼ�� void FDC2X14_Init(void) { GPIO_InitTypeDef GPIO_InitStructure; RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOB, ENABLE ); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP ; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOB, &GPIO;_InitStructure); GPIO_ResetBits(GPIOB,GPIO_Pin_9); // ������ IIC_Init();//��ʼ��iic //����SetFDC2X14�Ĵ��� SetFDC2X14(RCOUNT_CH0,0x30,0xCB); SetFDC2X14(RCOUNT_CH1,0x30,0xCB); SetFDC2X14(RCOUNT_CH2,0x30,0xCB); SetFDC2X14(RCOUNT_CH3,0x30,0xCB); SetFDC2X14(CLOCK_DIVIDERS_C_CH0,0xff,0x01); SetFDC2X14(CLOCK_DIVIDERS_C_CH1,0x20,0x01); SetFDC2X14(CLOCK_DIVIDERS_C_CH0,0x20,0x01); SetFDC2X14(CLOCK_DIVIDERS_C_CH1,0x20,0x01); SetFDC2X14(SETTLECOUNT_CH0,0xff,0xff); SetFDC2X14(SETTLECOUNT_CH1,0x00,0x19); SetFDC2X14(SETTLECOUNT_CH2,0x00,0x19); SetFDC2X14(SETTLECOUNT_CH3,0x00,0x19); SetFDC2X14(ERROR_CONFIG,0x00,0x00); SetFDC2X14(MUX_CONFIG,0x82,0x0c); SetFDC2X14(DRIVE_CURRENT_CH0,0x50,0x00); SetFDC2X14(DRIVE_CURRENT_CH1,0x50,0x00); SetFDC2X14(DRIVE_CURRENT_CH2,0x50,0x00); SetFDC2X14(DRIVE_CURRENT_CH3,0x50,0x00); SetFDC2X14(CONFIG,0x14,0x01);//ʹ���ⲿʱ�� 0x17 0x01 //��ȡ��ʼֵ���ֵ� Init_FDC[0]=FDC2X14ReadCH(0); Init_FDC[1]=FDC2X14ReadCH(1); Init_FDC[2]=FDC2X14ReadCH(2); Init_FDC[3]=FDC2X14ReadCH(3); } //���ݶ�ȡ //indexͨ������ int FDC2X14ReadCH(u8 index) { int result; switch(index) { case 0x00: result = ReadFDC2X14(DATA_CH0,DATA_LSB_CH0); break; case 0x01: result = ReadFDC2X14(DATA_CH1,DATA_LSB_CH1); break; case 0x02: result = ReadFDC2X14(DATA_CH2,DATA_LSB_CH2); break; case 0x03: result = ReadFDC2X14(DATA_CH3,DATA_LSB_CH3); break; } // printf("result=%d \r\n",result); return result; } void SetFDC2X14(u8 Address,u8 MSB,u8 LSB) { IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(Address); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(MSB); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(LSB); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); } unsigned int ReadFDC2X14(u8 firstAddress,u8 secondAddress) { unsigned int temp; u8 result[4]; IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(firstAddress); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_R); IIC_Wait_Ack(); ADS_delay(); result[0]=IIC_Read_Byte(1);//���ֽ� ����λ���� result[0] = result[0]<<4; result[0] = result[0]>>4; IIC_Ack(); ADS_delay(); result[1]=(IIC_Read_Byte(1)); //temp=���ֽ�+���ֽ� IIC_Ack(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(secondAddress); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_R); IIC_Wait_Ack(); ADS_delay(); result[2]=IIC_Read_Byte(1);//���ֽ� ����λ���� IIC_Ack(); ADS_delay(); result[3]=(IIC_Read_Byte(1)); //temp=���ֽ�+���ֽ� IIC_Ack(); IIC_Stop(); ADS_delay(); temp = (unsigned int)(((result[0]<< 24) | (result[1] << 16) | (result[2] << 8) | (result[3] & 0xff))); return(temp); } unsigned int ReadFDC2X14_1(u8 firstAddress) { unsigned int temp; u8 result[4]; IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(firstAddress); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_R); IIC_Wait_Ack(); ADS_delay(); result[0]=IIC_Read_Byte(1);//���ֽ� ����λ���� IIC_Ack(); ADS_delay(); result[1]=(IIC_Read_Byte(1)); //temp=���ֽ�+���ֽ� IIC_Ack(); IIC_Stop(); ADS_delay(); temp=(result[1]<<8)+result[1]; return(temp); } /*������·���� *index:0����·0 * 1����·1 * 2����·2 * 3����·3 *����ֵ����·�ܵ���C */ float Cap_Calculate(u8 index) { float Cap,cap_init; Data_FDC[index]= FDC2X14ReadCH(index); Cap = 114262451.63/(Data_FDC[index]); cap_init=114262451.63/(Init_FDC[index]); return (Cap*Cap)-(cap_init*cap_init); } float Cap_Calculate_Xtimce(u8 timce,u8 index) { float Cap; u8 i; Cap=0; for(i=0;i
(系统自动生成,下载前可以参看下载内容)
下载文件列表
相关说明
- 本站资源为会员上传分享交流与学习,如有侵犯您的权益,请联系我们删除.
- 本站是交换下载平台，提供交流渠道，下载内容来自于网络，除下载问题外，其它问题请自行百度。
- 本站已设置防盗链，请勿用迅雷、QQ旋风等多线程下载软件下载资源，下载后用WinRAR最新版进行解压.
- 如果您发现内容无法下载，请稍后再次尝试；或者到消费记录里找到下载记录反馈给我们.
- 下载后发现下载的内容跟说明不相乎，请到消费记录里找到下载记录反馈给我们，经确认后退回积分.
- 如下载前有疑问，可以通过点击"提供者"的名字，查看对方的联系方式，联系对方咨询.
