恒河YOKOGAWA FA-M3 YHLSｍａｓｔｅｒModule用户手册.pdf恒河YOKOGAW

文件名称: 恒河YOKOGAWA FA-M3 YHLSｍａｓｔｅｒModule用户手册.pdf

所属分类: 其它

开发工具:

文件大小: 1mb

下载次数: 0

上传时间: 2019-10-31

提供者: weixin_********

下载 (1mb)

不能下载？报告错误

详细说明：恒河YOKOGAWA FA-M3 YHLSｍａｓｔｅｒModule用户手册pdf,恒河YOKOGAWA FA-M3 YHLSｍａｓｔｅｒModule用户手册Applicable Product O Range-free Multi-controller FA.M3 Model code F3LH02-0N Name YLHS Master module The document number and document model code for this manual are given below Refer to the document number in all communications also refer to the document number or the document model code when purchasing additional copies of this manual Document no IM34M6H46-01E Document model code. docIm M34M6H46-01 1st Edition: Nov. 1. 2005-00 Media No I M 34M16H46-01E(CD) 1st Edition: Nov 1, 2005-00(AR) All Rights reserved Copyright a 2001. Yokogawa Electric Ccrporat mportant ■ About this manual This Manual should be passed on to the end user Before using the controller, read this manual thoroughly to have a clear understanding of the controller This manual explains the functions of this product, but there is no guarantee that they will suit the particular purpose of the user. Under absolutely no circumstances may the contents of this manual be transcribed or copied, in part or in whole, without permission The contents of this manual are subject to change without prior notice Every effort has been made to ensure accuracy in the preparation of this manual However, should any errors or omissions come to the attention of the user, please ontact the nearest yokogawa electric representative or sales office Safety Precautions when Using/Maintaining the Product The following safety symbols are used on the product as well as in this manual Danger. This symbol on the product indicates that the operator must follow the instructions laid out in this instruction manual to avoid the risk of personnel injuries fatalities, or damage to the instrument. Where indicated by this symbol, the manual describes what special care the operator must exercise to prevent electrical shock or other dangers that may result in injury or the loss of life Protective Ground Terminal. Before using the instrument, be sure to ground this termina Function Ground Terminal. Before using the instrument, be sure to ground this terminal Alternating current. Indicates alternating current Direct current. Indicates direct current M34M6H46-01 1st Edition: Nov. 1. 2005-00 The following symbols are used only in the instruction manual WARNING Indicates a Warning Draws attention to information essential to prevent hardware damage, software damage or system failure CAUTION Indicates a Caution Draws attention to information essential to the understanding of operation and functions TIP ndicates a“T|P Gives information that complements the present topic SEE ALSO Indicates a"SeE also reference Identifies a source to which to refer For the protection and safe use of the product and the system controlled by it, be sure to follow the instructions and precautions on safety stated in this manual whenever handling the product. Take special note that if you handle the product in a manner other than prescribed in these instructions, the protection feature of the product may be damaged or impaired. In such cases, Yokogawa cannot guarantee the quality, performance function and safety of the product When installing protection and/or safety circuits such as lightning protection devices and equipment for the product and control system as well as designing or installing separate protection and/or safety circuits for fool-proof design and fail-safe design of processes and lines using the product and the system controlled by it, the user should implement it using devices and equipment, additional to this product If component parts or consumable are to be replaced be sure to use parts specified by the company This product is not designed or manufactured to be used in critical applications which directly affect or threaten human lives and safety-such as nuclear power equipment, devices using radioactivity, railway facilities, aviation equipment, air navigation facilities, aviation facilities or medical equipment. If so used, it is the user's responsibility to include in the system additional equipment and devices that ensure personnel safety Do not attempt to modify the product Exemption from Res ponsibility Yokogawa Electric Corporation(hereinafter simply referred to as Yokogawa Electric makes no warranties regarding the product except those stated in the WARranTY that is provided separately Yokogawa Electric assumes no liability to any party for any loss or damage, direct or indirect, caused by the use or any unpredictable defect of the product M34M6H46-01 1st Edition: Nov. 1. 2005-00 Software Supplied by the Company Yokogawa Electric makes no other warranties expressed or implied except as provided in its warranty clause for software supplied by the company Use the software with one computer only. You must purchase another copy of the software for use with each additional computer. Copying the software for any purposes other than backup is strictly prohibited Store the original media, such as floppy disks, that contain the software in a safe place Reverse engineering, such as decompiling of the software, is strictly prohibited No portion of the software supplied by Yokogawa Electric may be transferred exchanged, or sublet or leased for use by any third party without prior permission by Yokogawa Electric M34M6H46-01 1st Edition: Nov. 1. 2005-00 General Requirements for Using the FA-M3 Controller O Avoid installing the FA-M3 controller in the following locations: Where the instrument will be exposed to direct sunlight, or where the operating temperature exceeds the range 0°cto55°℃(32°Fto131F) Where the relative humidity is outside the range 10 to 90%, or where sudden temperature changes may occur and cause condensation Where corrosive or flammable gases are present Where the instrument will be exposed to direct mechanical vibration or shock Where the instrument may be exposed to extreme levels of radioactivity o Use the correct types of wire for external wiring Use copper wire with temperature ratings greater than 75c O Securely tighten screws Securely tighten module mounting screws and terminal screws to avoid problems such as faulty operation Tighten terminal block screws with the correct tightening torque as given in this manua O Securely lock connecting cables Securely lock the connectors of cables, and check them thoroughly before turning on the power O Interlock with emergency-stop circuitry using external relays Equipment incorporating the FA-M3 controller must be furnished with emergency- stop circuitry that uses external relays. This circuitry should be set up to interlock correctly with controller status(stop/run) o Ground for low impedance For safety reasons, connect the [FG] grounding terminal to a Japanese Industrial Standards(JIs)class d(earlier called Class 3 ) Ground. For compliance to CE Marking use braided or other wires that can ensure low impedance even at high frequencies for grounding 1 Japanese Industrial Standard (JIS)Class D Ground means grounding resistance of 100 Q2 max o Configure and route cables with noise control considerations Perform installation and wiring that segregates system parts that may likely become noise sources and system parts that are susceptible to noise. Segregation can be achieved by measures such as segregating by distance, installing a filter or segregating the grounding system Configure for CE Marking Conformance For compliance to CE Marking, perform installation and cable routing according to the description on compliance to CE Marking in the"Hardware Manual (M34M6C1101E M34M6H46-01 1st Edition: Nov. 1. 2005-00 o Keep spare parts on hand Stock up on maintenance parts including spare modules, in advance Discharge static electricity before operating the system Because static charge can accumulate in dry conditions, first touch grounded metal to discharge any static electricity before touching the system O Never use solvents such as paint thinner for cleaning Gently clean the surfaces of the FA-M3 controller with a cloth that has been soaked in water or a neutral detergent and wringed Do not use volatile solvents such as benzine or paint thinner or chemicals for cleaning, as they may cause deformity, discoloration, or malfunctioning Avoid storing the FA.M3 controller in places with high temperature or humidity: Since the CPU module has a built-in battery, avoid storage in places with high temperature or humidit Since the service life of the battery is drastically reduced by exposure to high temperatures, take special care(storage temperature should be from -20C to 75°C) There is a built-in lithium battery in a CPU module and temperature control module which serves as backup power supply for programs device information and configuration information. The service life of this battery is more than 10 years in standby mode at room temperature. Take note that the service life of the battery may be shortened when installed or stored at locations of extreme low or high temperatures. Therefore, we recommend that modules with built-in batteries be stored at room temperature. Always turn off the power before installing or removing modules Failing to turn off the power supply when installing or removing modules, may result in damage o Do not touch components in the module In some modules you can remove the right-side cover and install ROM packs or change switch settings. While doing this, do not touch any components on the printed-circuit board, otherwise components may be damaged and modules may fail to work O Do not use unused terminals Do not connect wires to unused terminals on a terminal block or in a connector Doing so may adversely affect the functions of the module M34M6H46-01 1st Edition: Nov. 1. 2005-00 ntroduction ■ Overview of the manua This manual describes the specifications, operations, and communications protocol of the YHLS (Yokogawa High-speed Link System)master module F3LHO2-0N Related Instruction Manuals The manuals to be read depend on the cpu module to be used You should read the latest versions of the following instruction manuals as required O F3SP28F3SP38, F3SP53. F3SP58, or F3SP59 For information on sequence cPu functions, refer to Sequence CPU Instruction Manual -Functions (for F3SP28-3N/3S, F3SP38-6N/6S F3SP53-4H4S,F3SP58-6H6S,F3SP59-7s)(M34M6P13-01E) For information on sequence cPu instructions, refer to Sequence CPU Instruction Manual -Instructions(IM34M6P12-03E For information on creating ladder programs, refer to FA-M3 Programming Tool Wide Field2(IM34M6Q15-01E) 0 F3SP21F3SP25, F3SP35F3SP05, or F3SP08 For information on sequence cPu functions, refer to Sequence CPU Instruction Manual -Functions(for F3SP21, F3 SP25, and F3SP35) (IM34M6P1202E) For information on sequence CPU instructions, refer to Sequence CPU Instruction Manual -Instructions(IM34M6P12-03E) For information on creating ladder programs, refer to FA-M3 Programming Tool WideField2 (IM34M6Q15-01E) All sequence CPU modules For the FA-M3 specifications and configurations installation and wiring test run maintenance. and module installation restrictions refer to 1: Refer to the relevant product manuals for specifications except for power supply modules, base modules, input/output modules. cables and terminal units Hardware Manual (IM34M6C11-01) M34M6H46-01 1st Edition: Nov. 1. 2005-00 Copyrights and Trademarks Copyrights Copyrights of the programs and online manual included in this CD-ROM belong to Yokogawa Electric Corporation This online manual may be printed but PdF security settings have been made to prevent alteration of its contents This online manual may only be printed and used for the sole purpose of operating this product. When using a printed copy of the online manual, pay attention to possible inconsistencies with the latest version of the online manual. ensure that the edition agrees with the latest CD-ROM version. Copying, passing, selling or distribution(including transferring over computer networks of the contents of the online manual, in part or in whole, to any third party, is strictly prohibited. Registering or recording onto videotapes and other media is also prohibited without expressed permission of Yokogawa Electric Corporation ■ Trademarks trademarks or registered trademarks of their respective companies Da The trade and company names that are referred to in this document are either M34M6H46-01 1st Edition: Nov. 1. 2005-00

(系统自动生成,下载前可以参看下载内容)